96
3. Disassembly and Assembly 01/2018 Rev. 1 EA(B)O-6X06
6497a
6492a
6485
Transmission Assembly
6. Install the shift rails’ rear support.
NOTE: The shift rails’ rear support will be used to
bring the shafts and shift rails assembly to the correct
position on the front case. After that, remove for
adjusting the assembly in the case and then reinstall.
NOTE: Disengage all gears, putting them in neutral
position.
5. Attach the shift rails set, as assembled before in this
manual, to the mainshaft and countershaft assembly,
tting the 1st/2nd and 3rd/4th shift yokes into their
respective sliding sleeves.
To Next Page
Loading...
