EDR-5000 IM02602007E
Name Description
IRIG-B.Control Signal1 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal2 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal3 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal4 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal5 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal6 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal7 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal8 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal9 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal10 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal11 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal12 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal13 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal14 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal15 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal16 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal17 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal18 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
SNTP.SNTP active Signal: If there is no valid SNTP signal for 120 sec, SNTP is regarded as inactive.
Statistics.ResFc all Signal: Resetting of all Statistic values (Current Demand, Power Demand, Min, Max)
Statistics.ResFc I Demand Signal: Resetting of Statistics - Current Demand (avg, peak avg)
Statistics.ResFc P Demand Signal: Resetting of Statistics - Power Demand (avg, peak avg)
Statistics.ResFc Max Signal: Resetting of all Maximum values
Statistics.ResFc Min Signal: Resetting of all Minimum values
Statistics.StartFc I Demand-I State of the module input: Start of Statistics of the Current Demand (Update the displayed Demand )
www.eaton.com 1007
To Next Page
Loading...
