Eaton EDR-5000 - Page 426

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
Interl CLOSE1 Interlocking of the CLOSE command 1..n, Assignment
List
Wired Inputs.Bkr
Trouble-I
[Control
/Bkr
/Interlockings]
Interl CLOSE2 Interlocking of the CLOSE command 1..n, Assignment
List
-.- [Control
/Bkr
/Interlockings]
Interl CLOSE3 Interlocking of the CLOSE command 1..n, Assignment
List
-.- [Control
/Bkr
/Interlockings]
Interl OPEN1 Interlocking of the OPEN command 1..n, Assignment
List
-.- [Control
/Bkr
/Interlockings]
Interl OPEN2 Interlocking of the OPEN command 1..n, Assignment
List
-.- [Control
/Bkr
/Interlockings]
Interl OPEN3 Interlocking of the OPEN command 1..n, Assignment
List
-.- [Control
/Bkr
/Interlockings]
SC CLOSE Switching CLOSE Command, e.g. the state of the Logics
or the state of the digital input
1..n, DI-LogicList -.- [Control
/Bkr
/Ex OPEN/CLOSE
Cmd]
SC OPEN Switching OPEN Command, e.g. the state of the Logics
or the state of the digital input
1..n, DI-LogicList -.- [Control
/Bkr
/Ex OPEN/CLOSE
Cmd]
t-TripCmd Minimum hold time of the OPEN-command (Breaker,
load break switch)
0 - 300.00s 0.2s [Control
/Bkr
/Trip Manager]
Latched Defines whether the Relay Output will be Latched when it
picks up.
Inactive,
Active
Inactive [Control
/Bkr
/Trip Manager]
www.eaton.com 426