Eaton i-on16 User Manual

i-on16 3. Setting and Unsetting
Page 21
Instant Set/Silent Set:
Note: Make sure you are outside the
protected area before taking the
next step.
a. Press .
The keypads give a double “beep”
and the system sets immediately.
(If your system is programmed for
silent set then the keypads remain
silent.)
Timed Exit:
a. Press .
The keypad sounds the exit tone
(a continuous tone). The top line
of the display shows the part of
the system being set, the bottom
line shows the remaining exit time
(in seconds).


b. Leave by the designated exit door.
Remember to close the door.
At the end of the exit time the
system sets.


Exit Terminate Button:
a. Press .
The keypad sounds the exit tone.
The top line of the display shows
the part of the system being set,
the bottom line shows “Exit
Terminate”.


b. Leave by the designated exit door.

Eaton i-on16 Specifications

General

Brand	Eaton
Model	i-on16
Category	Security System
Language	English