Eaton i-on16 - Page 44

4. Administration i-on16
Page 38
6 Press .


7. Press .


8. Key in the new access code .
Access codes are four digits long.
When you press the last digit of
the access code the display asks
you to key in the same access
code again.


9. Key in the same digits again, in
the same order.
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:


followed by:


If a user forgets their code then a Master user must delete that user from
the system (see page 47), and recreate a new user with a new code (see
page 45).
Proximity Tags
No user can change or delete any other user’s proximity tag. (A Master
User can register a proximity tag for a new user when they first add the
user to the system, see page 45.) Any user except a Guard or Set Only
user can register a tag for themselves as follows:
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag, see page 9).


4. Press  .


If you are a Master User:
(otherwise go to step 6)
5. Press .

