Eaton i-on16 - Page 45

i-on16 4. Administration
Page 39
a) Press .


b) Press .


c) Press  or . until the bottom
line of the display shows your own
user name.


d) Press .


e) Press  or . until the bottom
line of the display shows:


f) Go on to step 8.
If you are a Normal User:
6. Press .


7. Press  until the display shows:


8. Press .
Note: If you already have a prox tag
allocated to you then the screen
will display “Delete Prox Tag?”.
See page 43.


9. Hold the prox tag up to the
keypad.
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:
The control unit learns the identity
of the tag and links it with your
access code.


followed by:


You cannot register more than one tag per user. If you present a tag that
the control unit has already registered to another user then you will hear a
single low tone, the display will show a message that the tag is already in
use and will then revert to asking you to present the tag.
If you do not wish to register a tag for the user then press .