Eaton i-on16 - Remote Controls and Two-way Key Fobs

4. Administration i-on16
Page 40
If you have a proximity tag and want to know who it belongs to then use the
Test - Prox Tag menu option, see page 49 .
Remote Controls and Two-way Key Fobs
No user can change any other user’s remote control or two-way keyfob. (A
Master User can register a remote control or two-way keyfob for a new user
when they first add the user to the system, see page 45.) Any user except
a “Duress”, “Guard” or “Set Only” user can register a remote control or two-
way keyfob for themselves as follows:
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press  .


If you are a Master User:
(otherwise go to step 6)
5. Press .


a) Press .


b) Press .


c) Press  or . until the bottom line
of the display shows your own user
name.


d) Press .


e) Press  or . until the bottom line of
the display shows:
Note: The control unit treats remote
controls and two-way keyfobs
the same when learning them.


f) Go on to step 8.