Eaton i-on16 User Manual

i-on16 4. Administration
Page 71
10. Choose either Set or Unset, as
follows:
a) Press  .
In the example on the right, the
button is currently programmed
to unset.


b) Press  to change the bottom
line between Set or Unset:


c) Press  .
The bottom line of the display
now shows the first item in a list
of setting or unsetting options
that you can apply to the
selected button.


The options available are:
Part Set Part sets the system.
Full Set Full set the system.
Unset Unset the system.
Note: Ask your Installer if the entry timer needs to be running before a
user can unset using a remote.
11. Choose what setting (or unsetting) option that you wish to
apply, as follows:
a) Press  or . until the bottom
line of the display shows the option
you want.


b) Press .
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:


12. Press  repeatedly to leave the
menu when you have finished.

Eaton i-on16 Specifications

General

Brand	Eaton
Model	i-on16
Category	Security System
Language	English