Eaton Managed ePDU - Page 17

EATON Managed ePDU User’s Guide 164201xxx Rev 1 DRAFT 10−OCT−2008
7
Chapter 3 Rack−Mounting the ePDU
Mount Safety Guidelines
In Eaton products which require rack mounting, please follow these precautions:
Operation temperature in a closed rack environment may be greater than 40°C .
Do not exceed the rated maximum ambient temperature of the
appliances (see Appendix E: Specications).
Ensure sucient airow through the rack environment.
Mount equipment in the rack carefully to avoid uneven mechanical loading.
Connect equipment to the supply circuit carefully to avoid overloading circuits.
Ground all equipment properly, especially supply connections, such as power strips
(other than direct connections), to the branch circuit.
Zero−U models are provided with high−grade engineering polycarbonate isolation
hardware to allow xing in a variety of positions within the rack.
For panel or ush mount, pull−out xing brackets are available on each end cap to
allow mounting on suitable rails (see Figure 4).
Figure 4. Pull−Out Fixing Brackets