Eaton Power Xpert 9395 - Power Maps Screen (Online Mode); Table 7-3: Display Function Menu Map; Figure 7-6. Home Screen

P-164000477 9395P750 kVA / 900 kVA and 1000 kVA / 1100 kVA 101
Revision 002 User’s and Installation Guide
Table 7-3: Display Function Menu Map
Figure 7-6. Home Screen
Number 1) in the figure above indicates the icon that allows selection of alternate language.
NOTE
On all screens, Black lines indicate NO power flow, Green lines indicate ACTIVE power flow,
Yellow lines indicate an out-of tolerance condition.
NOTE
Screens shown are representative examples of system operation. The screen data will vary
based on system activity at the time of observation.
7.3.4 Power Maps Screen (Online Mode)
The following figure shows the Main Menu and Power Maps screen. The Power Maps screen displays
immediately after entering the access code.
The Power Maps screen shows a real-time graphical representation of the operating status. See the
following figure.
Number 1) refers to Figure “Output kVA Screen from Home Screen”.
Number 2) refers to Figure “Average Efficiency Screen from Home Screen”.
POWER MAPS Allows operator to observe system power flow.
LOGS Allows access to system information logs.
STATISTICS Allows access to see system specific operation values.
SETTINGS Allows access to various screen controlled variables for system operation.
Level 0, 1 and 2 are for user/operator. Level 3 is used only by service person-
nel.
Menu Option
Description
1