P-164000477 9395P750 kVA / 900 kVA and 1000 kVA / 1100 kVA 8
Revision 002 User’s and Installation Guide
1.8 For more information
Refer to the Eaton 9390P and 9395P Sync Control Installation and Operation Manual for the following
additional information:
• Installation instructions, including site preparation, planning for installation, and wiring and safety
information. Detailed illustrations of the cabinet with dimensional and connection point drawings
are provided.
• Operation, including controls, functions of the standards and optional features, procedures for
using with the UPS, and information about maintenance.
Refer to the Eaton 9395P Integrated Battery Cabinet (Model IBC-L) installation manual (1028181) for
the following additional information:
• Integrated Battery Cabinet (IBC) installation instructions, including site preparation, planning for
installation, wiring, and safety information.
• Detailed illustrations of the cabinet, including dimension and connection point drawings.
Visit www.Eaton.com or contact your service representative for information on how to obtain copies of
these manuals.
1.9 Getting help
Call your local service representative if help is needed with any of the following:
• Scheduling initial startup
• Regional locations and telephone numbers
• A question about any of the information in this manual
• A question this manual does not answer
This symbol indicates that you should not discard waste electrical or electronic equipment (WEEE) in the
trash. For proper disposal, contact your local recycling/reuse or hazardous waste center.
RISK OF ELECTRIC SHOCK - Indicates that a risk of electric shock is present and the associated warning
should be observed.
To Next Page
Loading...
