Eaton Power Xpert 9395 - Power Maps Screen (Bypass Mode); Command Confirmation Pop-Up; Figure 7-10. Consumption Screen from Home Screen; Figure 7-11. Bypass Screen

P-164000477 9395P750 kVA / 900 kVA and 1000 kVA / 1100 kVA 103
Revision 002 User’s and Installation Guide
Figure 7-10. Consumption Screen from Home Screen
7.3.5 Power Maps Screen (Bypass Mode)
The following figure shows the Bypass screen. The Bypass screen displays only when the system is in
Bypass mode.
The Bypass screen shows a real-time graphical representation of the operating status.
Touching any of the buttons on the right side of the screen takes the user directly to that information
screen.
Figure 7-11. Bypass screen
Number 1) in the figure above refers to Figure “Output kVA Screen from Home Screen”.
Number 2) refers to Figure “Average Efficiency Screen from Home Screen”.
Number 3) refers to Figure “Consumption Screen from Home Screen”.
7.3.6 Command Confirmation Pop-Up
The figure below is an example of a command request confirmation pop-up screen. This type of pop-up
allows the user to confirm that the requested command is valid.
1
2
3