STARTER SYSTEM
CS-600
11
2. Carefully install rewind spring and case (B) on
starter case (C) as one piece. Match large ear
(b1) and small ear (b2) with posts (c1) and (c2) on
starter case.
3. Assemble rope reel (D) engaging hook (d) with
hook (a) of rewind spring.
4. Check for proper engagement of rewind spring
and rope reel by turning rope reel (D) clockwise
and counterclockwise.
2-3 Assembling starter
1. If rewind spring (A) is removed from spring case
(B), rewind inside case as shown.
B
A
d
D
a
C
B
b2
b1
D
c1
c2
To Next Page
Loading...
