Echo shindaiwa PB-8010 - Replacing Starter Pawl

STARTER SYSTEM
PB-8010, EB810
13
2-5 Replacing starter pawl
1. Remove magneto roter (Refer to “3-10 Inspect-
ing and replacing magneto rotor”).
2. Remove E-ring (V) from pawl (N).
3. Inspect spring (W) and pawl (N) for damage.
Replace the part(s) as required.
4. Install spring (W) to pawl (N) as shown.
5. Install spring (W) and pawl (N) to magneto roter
as shown.
6. Install new E-ring (V) to pawl (N).
V
N
N
W
W
N
V
N