Echo shindaiwa PB-8010 - Assembling Engine Assembly and Other Parts

ENGINE
PB-8010, EB810
55
7-13 Installing piston ring and cylinder (continued)
5. Set cylinder cover (F) on cylinder (C) and tighten
two bolts.
7-14 Assembling engine assembly and other parts
Assemble engine assembly and other parts, referring to the following instructions.
1. Assembling fl ywheel and woodruff key: “4-11 Replacing fl ywheel and key”
2. Assembling engine assembly and ignition switch: “3-6 Replacing ignition switch”.
3. Assembling fuel tank and lines: “4-3 Inspecting fuel tank and line”, “4-4 Replacing fuel lines and grom-
met”
4. Assembling fan and fan case: “6-3 Disassembling and assembling fan”.
5. Assembling starter pawl: “2-5 Replacing starter pawl”.
F
C