Echo shindaiwa PB-8010 - Replacing Backpack Harness

BACKPACK FRAME
PB-8010, EB810
39
5-3 Replacing backpack frame, debris guard and spring
1. Remove backpack frame assembly (Refer to “5-1
Removing backpack frame assembly”).
2. Detach debris guard (J) from ten tabs on back-
pack frame (G).
3. When assembling debris guard (J) and back-
pack frame (G), make sure ten tabs on backpack
frame (G) are fully engaged with holes on debris
guard (J).
4. When replacing spring (W), assemble spring (W)
and spring holder (X) and then install spring (W) to
backpack frame (G).
5. Reassemble removed parts ( Refer to “5-1 Re-
moving backpack frame assembly”).
J
G
G
X
W