SERVICE INFORMATION
PB-8010, EB810
2
1 SERVICE INFORMATION
1-1 Specifi cations
Dimensions* Length mm (in) 362 (14.3)
Width mm (in) 526 (20.7)
Height mm (in) 544 (21.4)
Dry weight** kg (lb) 11.2 (24.7)
Engine Type
YAMABIKO, stratifi ed scavenging, air-cooled,
two-stroke, single cylinder
Rotation Counterclockwise as viewed from the output end
Displacement cm
3
(in
3
) 79.9 (4.875)
Bore mm (in) 53.0 (2.087)
Stroke mm (in) 36.2 (1.425)
Compression ratio 6.9
Carburetor Type Diaphragm, horizontal-draft, with purge bulb
Model Walbro WYAB-1
Venturi size mm (in) 10.0 x 16.0 (0.39 x 0.63)
Throttle bore mm (in) 16.7 x 16.0 (0.66 x 0.63)
Air valve venturi mm (in) 15 (0.59)
Ignition Type CDI (Capacitor discharge ignition) system
Digital magneto
Spark plug NGK CMR7H
Exhaust Muffl er type Spark arrester muffl er
Starter Type Automatic rewind
Rope diameter x length mm (in) 3.8 x 1100 (0.15 x 43.3)
Fuel*
1
Type*
2
Mixed two-stroke fuel
Mixture ratio 50 : 1 (2%)
Gasoline Minimum 89 octane
Two-stroke air cooled engine oi
l
ISO-L-EGD (ISO/CD13738), JASO FC/FD
Tank capacity Full tank capacity: 2.56 (86.6)
L (U.S.fl .oz.) Usable capacity: 2.48 (83.9)
Throttle Type Throttle control and Throttle setting device
Blower Fan type Centrifugal, single stage
Max. air volume (with pipes) m
3
/min (cfm) 30.3 (1071)
Max. air velocity (with pipes) m/s (mph) 94.5 (211)
Discharge ID*
3
mm (in) 90.0 (3.5)
*Without blower pipes **With blower pipes
*
1
Refer to Operator’s manual
*
2
Premixed alkylate fuel for 2-stroke can be used.
*
3
Inner diameter
To Next Page
Loading...
