Echo shindaiwa PB-8010 - Replacing Backpack Harness; Blower System

BACKPACK FRAME
PB-8010, EB810
38
5-2 Replacing backpack harness
1. Remove backpack frame assembly (Refer to “5-1
Removing backpack frame assembly”).
2. Remove backpack harness from backpack
frame.
3. Insert upper harness buckle (R) into hole of
backpack frame.
4. Insert harness strap (S) into hole of backpack
frame.
5. Attach clip (T) to harness strap (S) as shown.
6. Insert lower harness buckle (U) into hole of
backpack frame.
7. Attach two harness buckles (V) to harness strap
as shown.
R
S
T
U
V