MAINTENANCE GUIDE
PB-8010, EB810
59
8-3 Service intervals
Intervals
Inspecting point Service Reference Daily 3 months 6 months
or or or
Before use 100 hours 300 hours
Screws and bolts * Retighten / Replace
Air fi lter Inspect / Clean 4-1
Choke system Inspect / Clean
Carburetor Inspect / Repair 4-6 to 4-13
Fuel leaks Inspect / Repair 4-2 to 4-5 **
Fuel line and grommet Inspect / Repair 4-4
Fuel strainer Clean / Replace 4-2
Fuel tank Clean inside 4-3
Spark plug Clean / Regap 3-3
Inspect / Replace 3-2, 3-3
Muffl er Spark Arrestor Inspect / Clean / Replace 7-3
Muffl er and exhaust port Inspect / Clean 7-3
Leads and connections Inspect / Repair 3-5, 3-6
Starter system Inspect / Repair 2-1 to 2-5
Daily:
Inspecting in every services.
IMPORTANT:
Service intervals shown above are maximum. Actual use and your experience will determine
the frequency of required maintenance.
* Retighten the following screws and bolts after fi rst 1 week use, and every 3 months.
Starter assembly bolts (3 pcs.)
Muffl er bolts (3 pcs.)
** Inspect after every refuel.
To Next Page
Loading...
