Eclipse AVN5500 - Switching the Required Time;Distance Remaining Display

94
6. Performing operations on the guided route
Navigation guidance
Switching the required time/distance remaining
display
If 2 or more destinations are set on the present location screen (if the present location is
along the set route) while route guidance is in progress, the required time/ distance
remaining can be switched.
Touch the required time/distance
remaining.
• If 2 or more destinations are set, the
required time/distance remaining for
each destination appears.
• Switching is impossible if having
deviated from the set route.
Touch the distance remaining
display up to the destination
desired.
Required time/distance remaining