Eclipse CD5030 - Changing the Passcode

The Bluetooth hands-free function
53
IX
Deleting preset dial
"DELETE?" and "Preset Dial" will be
displayed.
Deleting all data
"DELETE?" and "ALL" will be
displayed.
Changing the passcode
The passcode for the main unit can be changed.
4 to 8 digits must be used. The default setting is
1234.
Passcode and "0
*******
" will be
displayed.
[]:
Increases the number.
[]:
Decreases the number.
[>]:
Shifts the cursor to the right.
[<]:
Shifts the cursor to the left.
"NewPasscode?" will be displayed.
1
In the Phone Setting selection
mode, select "Delete" by pressing
the [ ] or [ ] button.
2
Press the [ENTER] button.
3
Select "Preset Dial" by pressing
the [ ] or [ ] button.
4
Press the [ENTER] button.
5
Press the [ENTER] button.
6
When the data in preset dial has
been deleted, "COMPLETED" will
be displayed.
1
In the Phone Setting selection
mode, select "Delete" by pressing
the [ ] or [ ] button.
2
Press the [ENTER] button.
3
Select "ALL" by pressing the [ ] or
[ ] button.
4
Press the [ENTER] button.
5
Press the [ENTER] button.
6
When the data has been deleted,
"COMPLETED" will be displayed.
1
In the Phone Setting selection
mode, select "Change Code" by
pressing the [ ] or [ ] button.
2
Press the [ENTER] button.
3
Enter numbers of 0 to 9 by
pressing the [ ] or [ ] button.
4
Shift the cursor by pressing the
[<] or [>] button.
5
Repeat Steps 3 and 4 to input the
passcode to enter the next digit.
6
Press the [ENTER] button when
you have input the passcode.
7
Press the [ENTER] button.
8
"COMPLETED" will be displayed.