64
Various Settings
How to operate the Sound Adjustment Mode
Various Settings
About Sound Adjustment Mode
The system has several features that allow you to adjust the acoustic characteristics inside the cabin.
Item Function Page
Parametric EQ
You can adjust the 7-band parametric equalizer.
This mode is also used to automatically measure the frequency characteristics
in the vehicle, and automatically adjust to the smooth characteristics with low
distortion based on the measurement data.
68
Time Alignment
The delay time and level for the sound from each speaker can be adjusted in
order to correct any phase mismatches in the sound resulting from the
listening position.
This mode is also used to automatically measure and adjust the sound arrival
time in the vehicle.
The Time Alignment cannot be specified together with Position selector.
71
Position selector
You can select the speaker level or balance that was preset in each seat.
This mode cannot be specified together with Time Alignment.
73
Cross over
Specified frequency bands are allocated to each speaker for improved sound
integration.
73
Multi-harmonizer
When original sounds are converted to MP3/WMA format, frequency ranges
that are not normally audible to the human ear are compressed. The multi-
harmonizer can be used to play back these compressed sounds at as close to
their original from as possible so that clear and powerful sound can be
enjoyed.
74
Non-fader setting The sub-woofer settings can be performed. 74
To Next Page
Loading...
Need help?
General
