Eclipse CD5030 - Making Changes with Display Adjustment Mode; Switching the Display Adjustment Mode; Switching the Brightness (Bright)

Making changes with Display Adjustment Mode
75
XIII
Making changes with Display Adjustment Mode
Various Settings
This mode lets you adjust the display brightness, change the button illumination color, etc.
Switching the Display
Adjustment Mode
The Menu selection mode is activated.
The display adjustment mode is
activated.
When the button is pressed, the
setting item changes in the following
order.
Bright ↔ Illumination ↔ DISP Type ↔
Scroll Type ↔ Bright ↔ www
This changes to each setting mode.
Switching the brightness (Bright)
Default setting is maximum brightness (8).
The bright setting mode is activated.
The brightness is switched in the order
shown below each time you press the
button. The selected settings will take
effect.
Level 1 ↔ Level 2 ↔ Level 3 ↔ Level 4
↔ Level 5 ↔ Level 6 ↔ Level 7 ↔
Level 8 ↔ Level 1 ↔ www
1
Press the [ /MENU] button for
more than one second.
2
Select "DISP" by pressing the [ ]
or [ ] button.
3
Press the [ENTER] button.
4
Select a setting item by pressing
the [ ] or [ ] button.
5
Press the [ENTER] button.
1
Select "Bright" by pressing the [ ]
or [ ] button.
2
Press the [ENTER] button.
3
Select the brightness by pressing
the [<] or [>] button.