Eclipse CD5030 - Setting Time (Clock Adjust); Switching Demonstration Screen Display (Demo)

80
Various Settings
Setting time (Clock Adjust)
This main unit uses the 12-hour display notation.
The clock setting mode is activated.
[>]:
Minutes will be switched.
[<]:
Hours will be switched.
[]:
Turns the time forward.
[ ]:
Turns the time back.
Switching demonstration screen
display (Demo)
Demonstration screen display settings can be
performed.
Default setting is ON. If the demonstration screen
display is set to ON, operation, motion picture,
and other screens will be displayed in
succession.
If you press a button while the demonstration
screens are being displayed, the demonstration
screens will be cancelled and the audio operation
screen will be displayed. If you do not operate
the status display function within 15 seconds, the
display will return automatically to the demo
screen.
The demo display setting mode is
activated.
1
Select "Clock Adjust" by pressing
the [ ] or [ ] button.
2
Press the [ENTER] button.
3
Select the item to be adjusted by
pressing the [<] or [>] button.
4
Adjust the time by pressing the [ ]
or [ ] button.
5
Press the [ENTER] button.
1
Select "Demo" by pressing the [ ]
or [ ] button.
2
Press the [ENTER] button.
3
Select "ON/OFF" by pressing the
[ ] or [ ] button.