92
About the optional unit
How to operate the tuner with an optional XM
satellite radio tuner connected (U.S.A./CANADA
only)
About the opti onal unit
About XM satellite radio
If the optional XM satellite radio tuner unit is
connected, satellite radio broadcasts can be
received.
With XM satellite radio, over 170 channels are
available including music, sports, news, and
entertainment programs.
The channel can be selected from categories
such as ROCK and DANCE, or by selecting
individual channels manually.
Reception of XM satellite radio is fee based; you
have to subscribe to it.
It is possible to subscribe through the XM radio
website.
URL: http://www.xmradio.com
ATTENTION
• For details on the settings and operation of
the XM satellite radio tuner unit, refer to the
XM satellite radio unit owner's manual.
• The main unit will accept up to 24 stations
in memory.
Selecting the radio mode
For details, refer to "Switching Audio
Modes" on page 17.
Selecting a channel
The radio bands will switch from XM1
→
XM2 → XM3 → XM4 in order each
time the button is pressed.
[ ]:
Selects a higher channel.
[]:
Selects a lower channel.
Reception is enabled for all channels
within the currently selected category.
(See Refer to page 93 for details on
"Category selection".)
[>]:
Starts searching for higher channels.
[<]:
Starts searching for lower channels.
Operations during rotary mode
Turn to the right:
Tunes to higher channels.
Turn to the left:
Tunes to lower channels.
1
Hold down the [SOURCE/PWR]
button for less than one second
until the XM satellite radio mode is
shown.
1
Hold down the [ /BAND] button for
less than one second to switch to
the desired XM band.
2
Tune to the desired channel by
pressing the [ ] or [ ] button.
3
Start the automatic channel search
by pressing the [<] or [>]
button for more than one second.
1
Turn the [VOL] knob right or left.
To Next Page
Loading...
Need help?
General
