90
About the optional unit
The HD Radio switches in the order
shown below each time the buttons
are pressed.
AUTO1 ↔ AUTO2 ↔ OFF ↔ AUTO1
↔ www
AUTO1:
Preferentially receives digital
broadcasting that is in the receivable
state. In areas where digital reception
is not possible, reception is
automatically switched to the analog
broadcasting reception mode to avoid
loss of reception.
AUTO2:
Preferentially receives digital
broadcasting that is in the receivable
state. In areas where digital reception
is not possible, reception is
automatically switched to the analog
broadcasting reception mode to avoid
loss of reception. Automatic scanning
is available only for digital
broadcasting. For automatic tuning,
see page 40.
OFF:
Receives only analog broadcasting.
The display shows "DIGITAL" while a
digital broadcasting is being received.
This is cleared during analog
reception.
Tuning to a sub channel (SPS)
When a station selected in the HD Radio has sub
channels (SPS), "P_" (_: number of sub
channels) is shown on the display, and you can
select sub channels.
Each time the button is pressed, the
sub channel changes.
[]:
Advances to the next sub channel.
[]:
Returns to the previous sub channel.
5
Select a setting item by pressing
the [ ] or [ ] button.
1
Press the [ ] or [ ] button for less
than one second.
To Next Page
Loading...
Need help?
General
