How to operate the Area Shot function (U.S.A./CANADA only)
43
IX
Map data
The map data used by the main unit was created based on information provided by NAVTEQ
TM
.
When using the map data, be aware of actual road conditions and obey traffic rules.
Copying, publishing or using maps in electronic media without express written consent is forbidden.
GPS (Global Positioning System)
GPS (Global Positioning System), is a system that locates current position (longitude and latitude)
using radio waves beamed to earth from 3 or 4 GPS satellites.
GPS information may not be available under the following circumstances:
• When GPS satellite radio waves are interrupted by buildings, tunnels, elevated roads, etc.
• When radio waves are interrupted by objects on or near the GPS antenna.
• In some instances, wave transmission is interrupted by the U.S. tracking control center during
maintenance or upgrades.
• When a digital cellular phone (1.5 GHz) is used near a GPS antenna.
User Registration Key display
User Registration Key is your CD7100's unique ID. In order to use the ECLIPSE web site (E-iSERV), a
16-digit User Registration Key is necessary.
The 16 digits of your User Registration Key will be displayed.
ATTENTION
Your User Registration Key is a 16-digit ID composed of numbers 0-9 and letters A-F.
WARNING
• Make sure to follow the actual traffic regulations when driving.
• During your vehicle while only following guidance point instructions may lead to traffic violations
and cause accidents.
• Do not modify this system for use other than that specified herein. Also, do not deviate from the
installation procedures described herein, ECLIPSE will not be held liable for damages including,
but not limited to serious injury, death or property damage resulting from installations that enable
unintended operation.
1
Check that the main unit is in standby mode.
2
Press the [SCREEN] button.
To Next Page
Loading...
Need help?
General
