Eclipse CD7100 - Deleting Station Name;Disc Title (Station Name;Title); Setting Guide Tone (Guide Tone); Setting Clock Display (Clock ON;OFF)

70
Various Settings
The character will be inserted where
the cursor is flashing.
Right: Advances the cursor to the
right.
Left: Returns the cursor to the left.
Upper: Advances the character
forward in its type.
Lower: Moves the character backward
in its type.
[Symbol] Initial value [!]
!
↔ " ↔ # ↔ $ ↔ % ↔ & ↔ ‘ ↔ ( ↔
) ↔ * ↔ + ↔ , ↔ - ↔ . ↔ / ↔ : ↔ ; ↔
<
↔ = ↔ > ↔ ? ↔ @ ↔ ‘ ↔ _ ↔
! ↔ 
[Upper-case alphabet characters] Initial
value [A]
A
↔ B ↔ C ↔  ↔ X ↔ Y ↔ Z ↔
A ↔ 
[Numeric characters] Initial value [1]
1
↔ 2 ↔ 3 ↔  ↔ 8 ↔ 9 ↔ 0 ↔
1 ↔ 
ATTENTION
• To change the type of character to be
entered, repeat steps 3 and 5.
• A maximum of 16 characters may be
entered per title.
• 30 titles can be stored.
• When the data storage area is full of data,
"FULL DATA" appears. To enter data newly,
delete the old data to make room.
Deleting station name/disc title
(Station Name/Title)
The station name/disc title that is
displayed at this point will be deleted.
Setting guide tone (Guide Tone)
The main unit is set at the factory to emit a beep
tone in response to button operation. The guide
tone feature may be disabled in the following
procedure:
The guide tone setting mode is
activated.
Setting clock display (Clock ON/
OFF)
Switches the clock display to ON/OFF.
The clock display setting mode is
activated.
4
Press the [SELECT] (Right/Left)
button to select the position in
which to enter the character.
5
Press the [SELECT] (Upper/Lower)
button to select characters.
6
Press the [ENTER] button to store
the title.
7
Press the [CUSTOM/MENU] or [RTN]
button to exit function mode.
1
Press the [RTN] button for more
than two seconds, when title
setting mode is activated.
2
Press the [CUSTOM/MENU] or
[RTN] button to exit function mode.
1
Press the [SELECT] (Upper/Lower)
button to select the Guide Tone.
2
Press the [ENTER] button.
3
Press the [SELECT] (Upper/Lower)
button to select the guide tone ON/
OFF.
4
Press the [CUSTOM/MENU] or
[RTN] button to exit function mode.
1
Press the [SELECT] (Upper/Lower)
button to select the Clock ON/OFF.
2
Press the [ENTER] button.
3
Press the [SELECT] (Upper/Lower)
button to select the clock display
ON/OFF.