Eclipse CD7100 - Changing Auxiliary Input Sensitivity

90
About optional unit
Changing auxiliary input sensitivity
The sensitivity of the auxiliary mode can be
changed.
The Menu Selection mode is
activated.
The function mode is activated.
The AUX sensitivity mode is
activated.
Pressing the button allows you to
toggle through sensitivity modes as
follows:
Low ↔ Mid ↔ Hi ↔ Low ↔ 
The selected settings will take effect.
1
Press the [CUSTOM/MENU] button
for more than two seconds.
2
Press the [SELECT] (Upper/Lower)
to select FUNC then press the
[ENTER] button.
3
Press the [SELECT] (Upper/Lower)
button to select the AUX
Sensitivity.
4
Press the [SELECT] (Upper/Lower)
button to select the sensitivity
mode.
5
Press the [CUSTOM/MENU] or
[RTN] button to exit function mode.