Configuration
26 UDC2500 Universal Digital Limit ControllerProduct Manual 8/05
3 Configuration
3.1 Overview
Introduction
Configuration is a dedicated operation where you use straightforward keystroke
sequences to select and establish (configure) pertinent control data best suited for your
application.
To assist you in the configuration process, there are prompts that appear in the upper and
lower displays. These prompts let you know what group of configuration data (Set Up
prompts) you are working with and also, the specific parameters (Function prompts)
associated with each group.
Table 3-1 shows an overview of the prompt hierarchy as it appears in the controller.
What’s in this section?
The following topics are covered in this section.
Table 3-1 Configuration Topics
TOPIC See Page
3.1 Overview 26
3.2 Configuration Prompt Hierarchy 27
3.3 Configuration Procedure 28
3.4 Tuning Set Up Group 29
3.5 Limit Set Up Group 30
3.6 Input 1 Set Up Group 31
3.7 Options Set Up Group 35
3.8 Communications Set Up Group 37
3.9 Alarms Set Up Group 40
3.10 Display Set Up Group 44
3.11 Configuration Record Sheet 45
To Next Page
Loading...
