EN_
810G20 - Version V5 – Juillet 2020 P. 67
Traduction de la notice originale
This message is displayed when the programmed quantity is reached or
if the refrigerant gas cylinder is empty.
Close the gas cylinder valve, then press ENTER to confirm.
The unit recovers the refrigerant in the HP hose.
The screen shows the total quantity added to the inner tank. This includes
the quantity programmed by the operator, the quantity recovered from
the HP hose and from the service unit’s circuit.
At the end of the cycle
• The unit prints a receipt
• Unscrew the coupler cap and disconnect the HP hose from the refrigerant gas cylinder.
• Press ENTER to return to the >>ECS OPERATION<< page.
REFRIGERANT TRANSFER
Hoses recovery
> Close cylinder
Tank 11.2 bar ENTER
REFRIGERANT TRANSFER
Hoses recovery
Processing...
1.5 bar
Transfer completed
Quantity: 1263 g
To Next Page
Loading...