12.3 Disposal and environmental protection
All components are to be disposed of in accordance with prevailing local environmental
regulations. Dispose of them accordingly
, depending on the condition, existing regulations
and with due regard for current provisions and criteria.
Recycle the dismantled components:
n Scrap all metals.
n Electrical waste and electronic components must be recycled.
n Recycle all plastic parts.
n Dispose of all other components in line with their material characteristics.
n Hand in batteries at communal collection points or dispose of them through a
specialist.
ENVIRONMENT!
Risk of environmental damage from incorrect disposal!
Incorrect disposal can be a threat to the environment.
–
Electrical scrap, electronic components, lubricants and other operating
fluids must be disposed of by approved waste disposal service providers
– If in doubt, contact your local authority, or an approved waste disposal
service provider, for information on correct disposal.
Prior to disposal, all parts which are in contact with media must be
decontaminated. Oils, solvents, detergents and contaminated cleaning tools
(brushes, cloths, etc.) must be disposed of in compliance with local
requirements, in accordance with the prevailing waste code and with due
attention to the notes contained in the manufacturers' safety data sheets.
ENVIRONMENT!
Reduction or avoidance of waste from reusable raw materials
Do not dispose of any components in the domestic waste.
T
ake them instead to the appropriate collection points for recycling.
Please follow the Directive on Waste Electrical and Electronic
Equipment 2012/19/EU, the aim and purpose of which is the
reduction or prevention of waste from recyclable raw materials.
This directive requires member states of the EU to increase the
collection rate of electronic waste so that it can be recycled.
Decommissioning, disassembly, environmental protection
60MAN054003, Ver. 1-02.2024
To Next Page
Loading...
Need help?
General
