1.7 Warranty
The manufacturer provides a warranty for operational safety, reliability and
performance under the following conditions only:
n Assembly
, connection, adjustment, maintenance and repairs must be carried out by
qualified and authorised specialists with the aid of the User Manual and all the
provided documents.
n Our products are used in accordance with the instructions in the User Manual.
n Only OE spare parts must be used for repairs.
Our products are built, tested and CE certified in accordance with current
standards/guidelines. They left the factory in a safe, faultless condition.
T
o keep the equipment in this condition and to ensure risk-free operation,
the user must observe the instructions/warnings, maintenance regulations,
etc. contained in these operating instructions and, if applicable, affixed to the
product.
The warranty and service conditions of the manufacturer also apply.
1.8 Contact
1.8.1
Manufacturer
Ecolab Engineering GmbH
Before contacting the
manufacturer
, we always
recommend that you contact your
Ä
sales partner in the first
instance.
Raiffeisenstraße 7
83313 Siegsdorf, Germany
Telephone (+49) 86 62 / 61 0
Fax (+49) 86 62 / 61 166
engineering-mailbox@ecolab.com
http://www.ecolab-engineering.com
1.8.2 Technical support contact
ECOLAB Engineering GmbH
If you contact technical support, make
sure to include the type code in the
e-mail
. The type code is the only way
to identify the metering station and its
documentation. You can find the type
code on the rating plate.
Raiffeisenstraße 7
83313 Siegsdorf, Germany
Telephone (+49) 86 62 / 61 234
Fax (+49) 86 62 / 61 166
Email: eursiefb-technicalservice@ecolab.com
http://www.ecolab-engineering.com
General
11 MAN054003, Ver. 1-02.2024
To Next Page
Loading...
Need help?
General
