Unauthorised modifications or replacement parts
Changes or modifications are not permitted without prior written permission from Ecolab
Engineering GmbH and result in the forfeiting of any and all warranty entitlements.
Original spare parts and accessories approved by the manufacturer heighten the degree
of safety
. Accessories must also be approved by Ecolab. The use of other components will
invalidate Ecolab's warranty.
CE Conformity
In the case of subsequent conversions, the
CE Conformity must be re-
evaluated and a new certificate issued before recommissioning.
2.3 Service life
If maintenance is conducted properly (visual inspection, functional testing, replacement of
parts, etc.), the life span of the control unit is approximately 10 years.
Afterwards, a revision or a general overhaul may need to be done the manufacturer.
Ä
Chapter 1.8.1 ‘Manufacturer’ on page 11
2.4 Safety measures taken by the operator
NOTICE!
It is expressly up to the operator to train, monitor and instruct its operating and
maintenance personnel so that they comply with all of the necessary safety
measures.
The frequency of inspections and controls must be complied with and
documented.
WARNING!
Danger due to improperly installed system components
Improperly installed system components can result in personal injury and
damage to the system.
– Check that the system components provided (pipe joints, flanges) have
been installed correctly
.
– If assembly has not been performed by Customer Service or another
authorised party, check that all system components are made of the correct
materials and meet the requirements.
Safety
14MAN054003, Ver. 1-02.2024
To Next Page
Loading...
Need help?
General
