1.4 Packaging
The individual packages are bundled to suit the expected transport conditions.
Only environmentally-friendly materials have been used in the packaging.
The packaging is designed to protect the individual components against shipping damage,
corrosion and other damage before assembly
.
Do not destroy the packaging and only remove it just before assembly.
There may be instructions on how to handle the packages (e.g. this way up,
fragile, keep dry). These must be adhered to accordingly
.
ENVIRONMENT!
Risk of environmental damage from incorrect disposal!
Packaging materials are valuable raw materials and can, in many cases, be
used again or be usefully processed and recycled.
Incorrect disposal of packaging materials can be a threat to the
environment.
–
Observe the local disposal regulations!
– Environmentally-friendly disposal of packaging materials.
– If necessary, hire a specialist to carry out disposal.
1.5 Storage
Under certain circumstances, instructions for storage, which go beyond
the requirements listed here, can be found on the package.
These must be complied with accordingly.
n Do not store outdoors.
n Store in a dry and dust-free place.
n Do not expose to aggressive media.
n Protect from sunlight.
n A
void mechanical vibrations.
n Storage temperature: +5 to 40° C.
n Relative humidity: max. 80 %.
n For storage periods of more than 3 months, check the general condition of all parts
and packaging regularly. If necessary, refresh or renew the preservative.
1.6 Equipment marking – rating plate
Information on equipment marking and information on the rating plate can be
found in
Ä
Chapter 11 ‘Technical data’ on page 55 .
It is important to provide the correct specification of the name and type in all
queries. This is the only way of ensuring fast and accurate processing of your
enquiry.
General
10MAN054003, Ver. 1-02.2024
To Next Page
Loading...
Need help?
General
