4 ecom-ST 1.0
Intended Use
The ecom-ST is a stationary measuring instrument made by ecom
GmbH, which is intended for the semi-continuous exhaust gas
measurement at combustion systems and which is permanently installed
on site. The device is operated either by the internal time control or by
time control via Modbus. A maximum measuring time of 1 hour without
interruption is possible. Afterwards, a fresh air purging phase of at least
4 minutes with subsequent fresh air calibration (at least 1 minute) must
be carried out.
Scope of Delivery
•
ecom-ST
•
Mains power cable 2,5 m
•
Kit of consumable spares
•
Protective housing (option)
To Next Page
Loading...
