ecom-ST 1.0 43
8.5 Probe/Tubing
Depending on how the device is used, the probe and hose should be cleaned
regularly in order to remove particle deposits and prevent premature wear
due to corrosion. The hose can be cleaned after loosening all plug
connections on the device and on the probe handle.
The O-rings of the hose connections should occasionally be lightly greased
with acid-free lubricant.
8.6 SBK system (option)
The PTFE filter in the probe head should be changed regularly.
The hot flue gas probe can damage the device or the transport
system if it comes into contact with.
Let the probe cool down before storing!
To Next Page
Loading...
Need help?
General
