ecom-ST 1.0 5
General Safety Information
Improper work on combustion engines or combustion controllers
can lead to injuries.
Work on such systems may only be carried out by specialists.
Live components are exposed when the housing is open. Before
opening the device, disconnect it from the power supply voltage.
Damage to the electronics
Moisture or frost can damage the electronics. Do not store the
device in damp rooms or by temperature below 0C!
Substances containing solvents damage the device's sensors.
Avoid contact with substances containing solvents!
Damage to electronic components
Electrostatic discharge can damage electronic components.
Before touching the inside of the housing, touch a grounded
component!
To Next Page
Loading...
