H100B Pulse Oximeter User Manual
- 4 -
fall on the patient.
16 As with all medical equipment, carefully route
patient cables to reduce the possibility of
patient entanglement or strangulation.
17 Ensure that the speaker is clear of any
obstruction and that the speaker holes are not
covered. Failure to do so could result in an
inaudible alarm tone.
18 Use only EDAN permitted sensors and
extension cables with the oximeter. Other
sensors or extension cables may fail and/or
cause improper monitor performance and/or
minor personal injury.
19 H100B Pulse Oximeter readings and pulse
signals can be affected by certain ambient
environmental conditions, sensor application
error, and certain patient conditions. See the
appropriate sections of the manual for specific
safety information.
20 Don’t mix new and old batteries together. Don’t
mix rechargeable batteries with alkaline
batteries.
To Next Page
Loading...
