EDAN H100B - Interface Customization; Language and Time Setup; Factory Default Settings

H100B Pulse Oximeter User Manual
- 42 -
A dialog box pops up:
Figure 3-13 Factory Default Config
Factory Default Configuration is shown as follows:
System Mode:
Patient Type: ADU
Alarm System: ON
Alarm Volume: 3
Pulse Volume: 3
Audio Paused (s): 60
SpO
2
Hi Alarm: 100
SpO
2
Lo Alarm: 90
PR Hi Alarm: 120
PR Lo Alarm: 50
Patient ID No.: 1
Data Storage: OFF
3.3.8 Sensitivity
The SpO2 reading is the average of data collected within