H100B Pulse Oximeter User Manual
- 48 -
After choosing ID, press the Function button to confirm
the setup. If the ID exists, the following confirmation
dialog box will pop up.
Figure 3-15 Confirm to Cover Data
3.3.13 Data Storage
Choose Data Storage, and set it to ON, then the
measurement data can be stored.
During the data storage, patient ID can not be changed.
If the user wants to change ID, he should change Data
Storage to OFF, then set a new ID.
Data stored in the oximeter can be exported through
Oximeter Viewer Data Management Software. Please
refer to section 3.2.4 for Data transfer procedure.
When the memory space is full, an icon
displays
in information area. Meanwhile Data Storage changes to
OFF automatically. Restart the oximeter and a dialog
box pops up. The user should confirm it to delete all the
To Next Page
Loading...
