H100B Pulse Oximeter User Manual
- 78 -
Appendix II EMC Information
-Guidance and Manufacture’s Declaration
Refer to the following tables for specific information
regarding this device’s compliance to IEC/EN
60601-1-2.
A2.1 Electromagnetic Emissions - for all
EQUIPMENT and SYSTEMS
Guidance and manufacturer’s declaration – electromagnetic
emissions
The device is intended for use in the electromagnetic
environment specified below. The customer or the user of the
device should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic
environment -guidance
RF emissions
CISPR11
Group 1
The device uses RF
energy only for its
internal function.
Therefore, its RF
emissions are very low
and are not likely to
cause any interference
To Next Page
Loading...
