EDAN H100B - Data Transfer Procedures

H100B Pulse Oximeter User Manual
- 35 -
medium alarm, and display in the information
area.
In menu state or trend state, if there is no operation for
30 seconds, the oximeter will return to measurement
state.
In measurement state, if there is no measurement data
and no operation for 10 minutes, the oximeter will turn
off automatically.
In Data transfer state, if the oximeter does not receive
any responsible signals for 10 minutes, it will turn off
automatically.
3.2.4 Data Transfer State
Set Data Storage in menu to ON, the measurement
value will be stored in the oximeter. The SpO
2
and PR
information can be transferred from oximeter to
Oximeter Viewer Data Management Software.
Data transfer procedure:
 After the measurement and storage are all
finished, turn off the oximeter;
 Connect the oximeter and the computer with a
cable for the communication between the
oximeter and the Oximeter Viewer Data