H100B Pulse Oximeter User Manual
- 25 -
remove the battery access door.
3. Place four AA batteries as shown in the
following figure, first push it oriented as
shown in ①, then press it oriented as shown
in ②.
4. Install the battery compartment cover.
To install the Ni-MH rechargeable battery package:
1. Make sure the oximeter is turned off.
2. Press the battery compartment latch and
remove the battery access door.
3. Place the Ni-MH rechargeable battery package
as shown in the follow figure, first push it
oriented as ①, then press it oriented as ②.
4. Install the battery compartment cover.
To Next Page
Loading...
