Edge-Core ES3510 - Configuring AAA Accounting; Figure 3-36 AAA TACACS+ Group Settings

User Authentication
3-55
3
Web – Click Security, AAA, TACACS+ Group Settings. Enter the TACACS+ group
name, followed by the number of the server, then click Add.
Figure 3-36 AAA TACACS+ Group Settings
CLI – Specify the group name for a list of TACACS+ servers, and then specify the
index number of a TACACS+ server to add it to the group.
Configuring AAA Accounting
AAA accounting is a feature that enables the accounting of requested services for
billing or security purposes.
Command Attributes
• Method Name – Specifies an accounting method for service requests.
The “default” methods are used for a requested service if no other methods have
been defined. (Range: 1-255 characters)
The method name is only used to describe the accounting method(s) configured
on the specified accounting servers, and do not actually send any information to
the servers about the methods to use.
• Service Request – Specifies the service as either 802.1X (user accounting) or
Exec (administrative accounting for local console, Telnet, or SSH connections).
• Accounting Notice – Records user activity from log-in to log-off point.
• Group Name - Specifes the accounting server group. (Range: 1-255 characters)
The group names “radius” and “tacacs+” specifies all configured RADIUS and
TACACS+ hosts (see “Configuring Local/Remote Logon Authentication” on page
3-49). Any other group name refers to a server group configured on the RADIUS
or TACACS+ Group Settings pages.
Console(config)#aaa group server tacacs tps-tacacs+ 4-89
Console(config-sg-tacacs)#server 1 4-89
Console(config-sg-tacacs)#