Edge-Core ES3510 - Configuring the Switch

Configuring the Switch
3-52
3
CLI – Specify all the required parameters to enable logon authentication.
Console(config)#authentication login radius 4-79
Console(config)#radius-server auth-port 181 4-82
Console(config)#radius-server key green 4-83
Console(config)#radius-server retransmit 5 4-83
Console(config)#radius-server timeout 10 4-84
Console(config)#radius-server 1 host 192.168.1.25 4-81
Console(config)#end
Console#show radius-server 4-84
Global Settings:
Communication Key with RADIUS Server:
Auth-Port: 181
Acct-port: 1813
Retransmit Times: 5
Request Timeout: 10
Server 1:
Server IP Address: 192.168.1.25
Communication Key with RADIUS Server: *****
Auth-Port: 181
Acct-port: 1813
Retransmit Times: 5
Request Timeout: 10
Radius server group:
Group Name Member Index
--------------------- -------------
radius 1
Console#
Console#configure
Console(config)#authentication login tacacs 4-79
Console(config)#tacacs-server 1 host 10.20.30.40 4-85
Console(config)#tacacs-server port 200 4-86
Console(config)#tacacs-server retransmit 5 4-87
Console(config)#tacacs-server timeout 10 4-88
Console(config)#tacacs-server key blue 4-87
Console#show tacacs-server 4-88
Remote TACACS+ server configuration:
Global Settings:
Communication Key with TACACS+ Server:
Server Port Number: 200
Retransmit Times : 5
Request Times : 10
Server 1:
Server IP address: 10.20.30.40
Communication key with TACACS+ server: ****
Server port number: 200
Retransmit Times : 5
Request Times : 10
Tacacs server group:
Group Name Member Index
--------------------- -------------
tacacs+ 1
Console(config)#