Edge-Core ES3510 - Show Map Ip Dscp; Show Map Ip Port

Command Line Interface
4-256
4
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
You must configure an ACL before you can map a CoS queue to the rule.
Example
show map ip dscp
This command shows the IP DSCP priority map.
Syntax
show map ip dscp
Command Mode
Privileged Exec
Example
Related Commands
map ip dscp (4-251)
show map ip port
Use this command to show the IP port priority map.
Syntax
show map ip port
Console(config)#interface ethernet 1/2
Console(config-if)#map access-list mac steve cos 0
Console(config-if)#
Console#show map ip dscp
dscp Mapping Status: Disabled
DSCP COS
---- ---
0 1
1 0
2 0
3 0
.
.
.
61 0
62 0
63 0
Console#