Edge-Core ES3510 - Show Version

System Management Commands
4-71
4
Command Usage
The session used to execute this command is indicated by a “*” symbol next to
the Line (i.e., session) index number.
Example
show version
This command displays hardware and software version information for the system.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
See “Displaying Switch Hardware/Software Versions” on page 3-12 for
detailed information on the items displayed by this command.
Example
Console#show users
Username accounts:
Username Privilege Public-Key
-------- --------- ----------
admin 15 None
guest 0 None
steve 15 RSA
Online users:
Line Username Idle time (h:m:s) Remote IP addr.
----------- -------- ----------------- ---------------
0 console admin 0:14:14
* 1 VTY 0 admin 0:00:00 192.168.1.19
2 SSH 1 steve 0:00:06 192.168.1.19
Web online users:
Line Remote IP addr Username Idle time (h:m:s).
----------- -------------- -------- ------------------
1 HTTP 192.168.1.19 admin 0:00:00
Console#
Console#show version
Serial Number:
Service Tag:
Hardware Version: R0A
EPLD Version: 0.00
Number of Ports: 10
Main Power Status: Up
Loader Version: 1.0.0.2
Boot ROM Version: 1.0.0.2
Operation Code Version: 1.0.1.4
Console#