Edge-Core ES3510 - Show Web-Auth; Web-Auth

Command Line Interface
4-118
4
web-auth
This command enables web authentication for an interface. Use the no form to
restore the default.
Syntax
[no] web-auth
Default Setting
Disabled
Command Mode
Interface Configuration
Command Usage
Both web-auth system-auth-control for the switch and web-auth for an
interface must be enabled for the web authentication feature to be active.
Example
show web-auth
This command displays global web authentication parameters.
Syntax
show web-auth
Default Setting
None
Command Mode
Privileged Exec
Example
Console(config-if)#web-auth
Console(config-if)#
Console#sh web-auth
Global Web-Auth Parameters
System Auth Control : Enabled
Login Page URL :
Login Fail Page URL :
Login Success Page URL :
Session Timeout : 3600
Quiet Period : 60
Max Login Attempts : 3
Console#