Configuring the Switch
3-240
3
CLI – This example enables UPnP, sets the device advertise duration to 200
seconds, the device TTL to 6, and displays information about basic UPnP
configuration.
Console(config)#upnp device 4-316
Console(config)#upnp device advertise duration 200 4-317
Console(config)#upnp device ttl 6 4-317
Console(config)#end
Console#show upnp 4-318
UPnP global settings:
Status: Enabled
Advertise duration: 200
TTL: 6
Console#
To Next Page
Loading...
